Versa

Accessories-for-Air-Valves-and-Systems.pdfByPass-Valve.pdfVAC_Bulletin.pdfCondensed-Catalog-Versa.pdfV-and-T-Series.pdfV-316-Series.pdf

The total spectrum of applications for Versa valves, covers a diversity of energy, environmental and high-tech markets including: process control, robotic, packaging, textile, wood, mobile, automotive, printing, tires, oil and gas drilling, and many other industries where reliable, precise control is not only necessary, but vital.

Versa offers a wide variety of directional control valves, comprised of 7 distinct valve series, constructed from 3 types of material – aluminum, brass, and stainless steel.  These valves may be actuated by solenoid, pilot, manual, and mechanical, are manufactured to ISO 9001 standards, and many also meet SIL 3 capability.

C Series. Aluminum
V, T & B Series. Brass.
C-316 & V-326 Series. Stainless Steel.
CMPA. C-316 Modular Air Package, Stainless Steel.
VMAP. V-316 Modular Air Package, Stainless Steel.
B-326 Series Valves. Stainless Steel.
NAMUR. E & C Series, Aluminum.
NAMUR. C-316 Series, Stainless Steel.
E & H Series. Aluminum & Stainless Steel.
EZ Series. Aluminum.
E3, E4 & E5 Series. Stainless Steel.
Filter/Regulator. Stainless Steel.
L & K Series. Aluminum.
Dust Excluder, Aluminum & Stainless Steel.
Bug Screen. Stainless Steel.
Flow Control. Stainless Steel.
Check Valve. Stainless Steel.
Bleed Control. Brass & Stainless Steel.
Bleed Valves. Brass.
Shuttle Valves. Brass & Stainless Steel.
Status Indicator Stainless Steel.
Quick Exhaust. Brass-Nickel Plated & Stainless Steel.
Electric Quick Exhaust. Stainless Steel.
Junction Box. Stainless Steel.
Relief Valve. Stainless Steel.
Block & Bleed Valves. Stainless Steel.
Manual Shutoff. Stainless Steel.

Mercer

Mercer Valve Company provides a 100% USA manufactured high-quality safety relief valve. Their patented "Auto Seat Technology" has a proven extended seat life that will allow your valve to open, close, seat and seal over and over again. It increases seat life, reduces repairs, and gives the valve a consistent set pressure. 

Auto Seat Technology is a non-rising stem design that uses low rated springs to achieve a consistent set pressure. A fully guided disk and spring give the valve accurate set pressures and help with reseating after each pop. The lip seal seat creates a tighter seal up to set pressure allowing for less leakage. Mechanical stops allow the disk to open to the same point every pop, allowing for the same flow rate and limiting spring stress. Auto Seat Technology reduces the need for repair while giving an accurate set pressure and tight seal. 

8100
9100 Threaded
900 Flanged
9100 Mod 20
9500 Snap Pilot
9500 Modulating

Westlock Controls

AccuTrak-Rotary-Position-Monitors.pdfICoT-Smart-Positioners.pdf

Westlock manufactures a wide range of products for the monitoring and control of process valves. Its products have been developed using the latest technology and are intended to work seamlessly with both on/off and modulating valves and actuators to help improve both performance and safety under the the latest international standards and approvals throughout the world in the chemicals, oil & gas, pharmaceutical, food & beverage, power and paper industries. 

Westlock Controls products are used in all industrial area classifications from hazardous, including Explosion proof and Intrinsically Safe, to non-hazardous for full weather protection or sanitary installations. 

Limit Switches & Sensors
Switch Boxes & Valve Monitors
Valve Control Monitors
Position Transmitters
Positioners
Solenoid Valves

Ruelco

Sand-Probe-Relay.pdfRegulator.pdfPressure-Switch.pdfFuse-Plug_Vent-Screen.pdfDial-Pressure-Switch.pdf

Ruelco is one of the world’s leading manufacturers of Instrumentation Controls. The versatility of its products is the greatest strength that they possess and its array of CNC machines allows for fast turnover and high accuracy in all of its processes. 

• Pressure Switches
• Dial Pilots
• Level Switches
• Cages
• Relays
• Tattletale Indicators
• Quick Exhausts
• Sand Probes
• Hydarulic Controllers
• Emergency Shutdown 
• Fuse Plugs
• Vent Screens
• Panel Accessories
• Relief Valves
• Check Valves
• Regulators

Peter Paul

General-Catalog.pdfSolenoid-Valves.pdf

Peter Paul is a manufacturer of top quality - high performance products. For over 60 years, it has developed a thorough knowledge of all facets of manufacturing and development of superior valves and operators consistently bring new and exciting products to the worlds marketplace.

Develop and manufacture premiere solenoid valve solutions, using innovation and continuous improvement to exceed customer expectations.

Develop and manufacture premiere solenoid valve solutions, using innovation and continuous improvement to exceed customer expectations.

• 2-way normally open
• 2-way normally closed
• 3-way normally closed (Exhaust to atmosphere)
• 3-way normally closed (Piped exhaust)
• 3-way normally open
• 3-way directional control
• 3-way multi-purpose
• Hazardous location valves
• Low watt valves
• High pressure valves
• Magnetic latching valves

CVS

CVS Controls is an industry leader in the manufacturing of Control Valves and associated instrumentation products. CVS meets and exceeds the industries requirements being internationally recognized as a manufacturer and supplier of quality products that are completely interchangeable with the industry’s leading brands.

Its products service Oil & Gas, Petrochemical, HVAC, Mining and Pulp & Paper Industries.

• Control Valves
• ESD
• Actuators
• Controllers
• Regulators
• Positioners
• CVS
• Pressure Sensor
• Pressure Pilot
• Centrifuges
• Chemical Pumps
• Thermometers
• Dew Point Testers
• Gauges

Hudson

Air-Cooled-Heat-Exchanger.pdfTuf-Lite-III-Blades.pdfInduced-Draft-Gear-Drive-Units.pdfForced-Draft-Gear-Drive-Units.pdfForced-Draft-Belt-Drive-Units.pdf

Since 1939, Hudson Products Corp. has designed and manufactured air-cooled heat exchanger equipment to serve the oil, gas and petrochemical processing industries.

Through continuous innovation, Hudson Products became the pioneer in this field, developing internationally recognized trademarks such as Fin-Fan Air-Cooled Heat Exchangers, Hy-Fin Extruded Finned Tubing, and Tuf-Lite and Tuf-Lite II FRP Axial Flow Fans for air coolers and cooling towers.

Hudson Products Corporation is committed to a Total Quality Management Process. Their goal is to deliver the highest quality of products.

• Air-Cooled Heat Exchangers
• High-Efficiency Axial-Flow Fans
• Humidified, Air-Cooled Heat Exchangers

Kor-Lok

Kor-Lok is a leading supplier to the industrial distribution market Instrumentation of fittings, tubing and valves. All instrumentation is of superior-quality and meets or exceeds NPT, JIC/SAE and International standards such as ISO and ABS. Kor-Lok products are designed for long-lasting service and reliability.

• Connections & Fittings
• Tubing
• Valves 

VEGA

Paper-Industry.PDFO-G-Industry–Refining.pdfSolutions-Capabilities.pdfO-G-Industry-Upstream-and-Midstream.pdf

VEGA develops and manufactures sensors for the measurement of level, point level and pressure as well as equipment and software for integration into process control systems. VEGAs measurement technology sets new standards in reliability and accuracy for all media and process conditions.

• Level Liquids
  • Radar
  • Guided Wave Radar
  • Ultrasonic
  • Capacitive
  • Hydrostatic
  • Radiation-based
• Level Solids
  • Radar
  • Guided Wave Radar
  • Ultrasonic
  • Capacitive
  • Radiation-based
• Switching Liquids
  • Vibration
  • Capacitive
  • Radar
  • Conductive
  • Radiation-based
• Switching Solids
  • Vibration
  • Capacitive
  • Radar
  • Radiation-based
• Pressure
  • Hydrostatic pressure
  • Process pressure
  • Differential pressure
• Density, Flow
  • Density
  • Flow

Jogler

Gauges-and-Transmitters.pdfGauges-Indicators-and-Analyzers.pdf

Jogler is a manufacturer of high quality Magnetic Level Gauges, Magnetostrictive Transmitters, Direct-Reading Level Gauges with armored shield, Sight Flow Indicators, Specific Gravity Analyzers, Point Level Switches and other accessories. Jogler products are custom designed to meet customer specifications and manufactured to applicable ASME B31.1 and B31.3 code requirements to ensure reliable operation and maintenance free design.

• Magnetic Level Gauge
• Magnostrictive Level Transmitter
• Armored Level Gauge
• Sight Flow Indicator
• Specific Gravity Analyzer 

Certus

Certus Process Solution is a team of experts in the valve automation field that truly understand the working conditions and challenges faced by end users. It was this understanding along with the company`s commitment to satisfy its customers requirements that lead to the development of the Self Contained SP Series Valve Actuator.

Certus manufactures self-contained valve actuators, high pressure hydraulic linear valve actuators, hydraulic power units and pneumatic, hydraulic and electric controls systems.

• Self-contained Valve Actuator

Winters Instruments

Product-Catalogue.pdfProduct-Overview-Spanish.pdfProduct-Overview-English.pdf

Since 1953, Winters Instruments has been manufacturing quality built instrumentation for all markets that require pressure and temperature measurement. Through the years, the company has grown in size and reputation and is now a leading, global manufacturer of industrial instrumentation. Winters operations adhere strictly to ISO 9001:2008 guidelines.

• Pressure Gauges
• Thermometers
• Thermowells
• Pressure Transmitters and Switches
• Diaphragm Seals
• Accessories

Soldo

"Linking the process with the control room" is what Soldo Controls has been doing since the establishment of the Company in 1996. With two manufacturing plants in Desenzano del Garda, Italy and Winston-Salem, North Carolina USA, Soldo brings the best-in-class position feedback devices suitable for diverse industries, from the industrial market to water treatment, food and beverage, chemical, petrochemical and O&G.

• Limit  Switch Boxes
• Limit Switches
• Manual Valve Limit Switches
• Magnetic Limit Switches
• Position Transmitters

Yokogawa

From its founding in 1915, Yokogawa Electric Corporation has contributed to society by supplying industry with cutting-edge products based on its measurement, control, and information technologies. Always sensitive to changing customer needs, Yokogawa has continued to transform itself and has become a leading company in the global industrial automation and control field.

• Differential & Gauge  Pressure Transmitters EJX, EJA
• Temperature Transmitter YTA
• Wireless Instrumentation
• Flow Transmitters (Magnetic Vortex, Coriolis, Rotameters)
• Liquid & Gas Analyzers
• Recorders & Data Acquisition
• Paperless Recorders
• Single-loop Controllers
• Distributed Control System (DCS) “Centum VP”
• Safety Instrumented System (SIS) “PROSAFE RS”tyo